The innovative carriage system


With the remote controlled carriage Liftliner, it is possible to work with the functions “lifting/lowering” at the same time.

Winch traction 40 kN
Standard wire rope Ø 11/100 mm/m
Sky line Ø 18 - 22 mm
Weight 1.050 kg ¹)

Liftliner LL40-2

With the remote controlled carriage Liftliner, it is possible to work with the functions “lifting/lowering” at the same time.

In that case, a particularly gentle and efficient work in thinning is possible, as well as a pinpoint placement of the logs at the unloading. Due to the separate hoist winch, the mainline cable and the haul back cable is attached to the carriage, and therefore has only the task of pulling the carriage.

The cable clamp on the skyline is switched only when the cable breaking device is activated, or by manual actuation. Therefore the carriage Liftliner LL40-2 works practically without wear on the main-and skyline.

  • Uphill- and downhill operation
  • Quick installation
  • Separate on board Hoisting winch
  • Allows driving and lifting/lowering at the same time
  • Minimized wear on skyline and main line
  • Double pulley for safe passing over supports
  • Userfriendly operation with KONRAD remote control
  • Receiver with integrated transformer for wider working range

Radio system

  • Remote control with display
  • Extremely light with high battery capacity
  • All the settings are possible on the remote control
  • Error diagnosis display of operating data of the diesel engine and hydraulic system on the display
  • Display of radio frequency and signal strength
  • Universal for all Konrad machines with KFS 16


Precise and safe lowering of the stems especially during downhill operations




Technical data

General information

Weight 1050 kg ¹)
Sky line diameter Ø18 - 22 mm
Operating voltage 12 V
Remote control system KFS-16, KFS-20

Diesel engine

Type designation HATZ 4H50 TICD, 4-cylinder diesel engine with turbo and intercooler
Power 55 kW (at 2300 U/min)
Torque 240 Nm (at 1700 U/min)
Displacement 1,95 l
Diesel tank capacity 25 l


Drive motor Radial piston motor
Winch pulling force 40 kN
Standard wire rope: Ø 11 mm / 100 m

Hydraulic system

Hydraulik oil pump Axial piston pump, closed oil circuit
Max. operating pressure 400 bar
Hydraulic oil specification HVLP 46
Hydraulic system filling capacity 22 l

1) Weight with resources; diesel tank empty

Optional equipment: In addition to the standard equipment, a broad range of optional equipment is also available. Further information on standard and optional equipment can be obtained from your KONRAD distributor.

The manufacturer reserves the right to make technical modifications and improvements.